Noen poster mangler. Ukjente beløp er ikke regnet som null. Se de tilgjengelige postene i tabellen eller årsregnskapet.
0 øreInn: Ikke tilgjengelig som data1 krone
Om tallene
2025 · 01.01.2025–31.12.2025 · NOK
Noen poster mangler. Ukjente beløp er ikke regnet som null. Se de tilgjengelige postene i tabellen eller årsregnskapet.
Inntekt = driftsinntekter + positive netto finansinntekter + eventuell skatteinntekt. Fordelingen bygger på regnskapets summer. Manglende utbytte eller annen egenkapitalbevegelse og beholdt beløp vises som ukjent. Beregnet av Firmablikk.
Har 14,99 kr for hver krone som forfaller innen et år
Omløpsmidler som kundefordringer og bank. 12,06 kr av det står i banken.
Bransjen: median 1,73 · n = 58 · 2025
Pengene i banken holder i 668 dager
Beregnet: bankinnskudd delt på driftskostnader per dag. Avskrivninger er ikke oppgitt, så de er med i kostnadene.
Av hver 100 kr selskapet eier er 93 kr egne penger og 7 kr gjeld
Bransjen: median 48 · n = 58 · 2025
Beregnet fra summene i årsregnskapet 2025 · Regnskapsregisteret
Nøkkeltall
7
Tallet for valgt år, endring fra året før og ti års utvikling. Stiplet linje er medianen i bransjen (NACE 72.100, 58 selskaper). Ingen ord-karakter – formelen står under.
2025
Nøkkeltall for 2025
Polight
Bransjemedian
Valgt år
Driftsmargin
−637,0 %
+527,0 pp fra 2024
median 0,9 % (n = 57)
Lavere enn 3 av 4 like store selskaper i bransjen
n = 57 · 2025
Lavere enn 3 av 4 selskaper i bransjen
Bransjen: median −4,0 % · n = 669 · 2025
= driftsresultat ÷ driftsinntekter
Totalrentabilitet
−33,1 %
+7,5 pp fra 2024
= (driftsres. + finansinnt.) ÷ sum eiendeler
EK-rentabilitet før skatt
−42,3 %
+6,5 pp fra 2024
= resultat før skatt ÷ gj.snitt egenkapital
Egenkapitalandel
93,5 %
+2,6 pp fra 2024
median 48,3 % (n = 58)
Høyere enn 3 av 4 like store selskaper i bransjen
n = 58 · 2025
Høyere enn 3 av 4 selskaper i bransjen
Bransjen: median 49,9 % · n = 1 120 · 2025
= egenkapital ÷ sum eiendeler
Likviditetsgrad 1
14,99
+4,82 fra 2024
median 1,73 (n = 58)
Høyere enn 3 av 4 like store selskaper i bransjen
n = 58 · 2025
Høyere enn 3 av 4 selskaper i bransjen
Bransjen: median 1,51 · n = 994 · 2025
= omløpsmidler ÷ kortsiktig gjeld
Gjeldsgrad
0,1
−0,03 fra 2024
median 0,9 (n = 58)
Lavere enn 3 av 4 like store selskaper i bransjen
n = 58 · 2025
Lavere enn halvparten av selskaper i bransjen
Bransjen: median 0,1 · n = 1 127 · 2025
= sum gjeld ÷ egenkapital
Lønn per krone omsatt
Ikke beregnet: mangler lønnskostnader i årsregnskapet.
Endring kan ikke beregnes: ett av årene mangler et beregnet nøkkeltall.
= lønnskostnader ÷ driftsinntekter × 100
Om tallene
01.01.2025–31.12.2025 · NOK
Regnet ut av Firmablikk fra årsregnskapet. Kilde: Regnskapsregisteret, hentet 13.10.2026.
Bransjemedian krever minst 20 selskaper.
EBITDA krever avskrivninger, som ikke finnes i Brreg-dataene. Nøkkeltallet vises når avskrivninger er tilgjengelige fra årsregnskapet.
Det vi har observert i Enhetsregisteret, Foretaksregisteret og Regnskapsregisteret. Brønnøysundregistrenes egne kunngjøringer finnes hos dem: Se kunngjøringene hos Brønnøysundregistrene
Datoene viser når vi observerte endringen eller hentet årsregnskapet, ikke når Brønnøysundregistrene kunngjorde den. Registreringsdatoen er hentet fra registeret.
Alt som endret seg i registrene, med før og etter.
Kapital og annet Opplysninger
Registrert kapital: Før: Beløp: 8 597 941,84 · Valuta: NOK · Aksjer: 214 948 546 · Innbetalt: Ikke oppgitt · Fullt innbetalt: Ikke oppgitt → Etter: Beløp: 8 635 767,72 · Valuta: NOK · Aksjer: 215 894 193 · Innbetalt: Ikke oppgitt · Fullt innbetalt: Ikke oppgitt
Kapital og annet Opplysninger
Antall ansatte: Før: 23 → Etter: 25
Dokumenter Dokumenter
Årsregnskap: Før: – → Etter: 2011
Årsregnskap: Før: – → Etter: 2012
Årsregnskap: Før: – → Etter: 2013
Årsregnskap: Før: – → Etter: 2014
Årsregnskap: Før: – → Etter: 2015
Årsregnskap: Før: – → Etter: 2016
Årsregnskap: Før: – → Etter: 2017
Årsregnskap: Før: – → Etter: 2018
Årsregnskap: Før: – → Etter: 2019
Årsregnskap: Før: – → Etter: 2020
Årsregnskap: Før: – → Etter: 2021
Årsregnskap: Før: – → Etter: 2022
Årsregnskap: Før: – → Etter: 2023
Årsregnskap: Før: – → Etter: 2024
Årsregnskap: Før: – → Etter: 2025
Roller Endring av styre
Styremedlem: Før: Yung Pang So → Etter: Fuqiang Fan
Kapital og annet Opplysninger
Institusjonell sektor: Før: – → Etter: 2100
E-post til virksomheten: Før: – → Etter: info@polight.com
Målform: Før: – → Etter: Bokmål
Vedtektsfestet formål: Før: – → Etter: Utvikle og levere optiske komponenter og alt som hører naturlig dertil, herunder å eie aksjer og andre verdipapirer i andre selskaper.
Aktivitet: Før: – → Etter: Utvikle teknologi innenfor display produkter, enten ved egenutvikling eller ved deltakelse i selskaper som helt eller delvis utvikler slike produkter.
Registrert kapital: Før: – → Etter: Beløp: 8 597 941,84 · Valuta: NOK · Aksjer: 214 948 546 · Innbetalt: Ikke oppgitt · Fullt innbetalt: Ikke oppgitt
poLight develops and produces active lens elements, primarily for small cameras in applications like mobile phones. New products such as optical image stabilizers (OIS) and shutter/Iris are also envisaged.
To enable extended application range, as well as new applications for our products, we have started an activity for designing and manufacturing a novel ASIC driver with increased voltage capability (50V). Higher available voltage will enable more optical power.
The main challenges to be addressed in this project are related to the trade-offs between performance, size and cost. High voltage capabilities while keeping low power consumption, good ESD (Electro Static Discharge) tolerance and low
EMI (Electro Magnetic Interference) normally come at a cost of increased device area, thus price. A smart design, using novel solutions, is required to obtain a device that meets the market tough requirements in terms of both performance and cost.
Microfail is devoted to understanding the effect of micro fails and defects on any observed issue like cracks, delamination, corrosion, moisture absorption and haziness. Larger, more complex structures like OIS (Optical Image Stabelizer) are most likely more sensitive to these defects and it is important that we are able to control them. Samples are selected from our product test programs (Not a part of this project) and made in controlled experiments due to time temperature and environment.
All selected samples are analysed by SINTEF and NTNU and evaluated in cooperation with poLight scientists. A number analytical techniques will be used including destructive and non-destructive tests described in the project description. We may also need analytical instruments not available in Norway. Through our partners we may use facilities in SNRF, CERN and som other laboratories. Finally we will tune and adjust wafer processing parameters and assembly process to avoid or reduce the number of defects.
This will cover a wide range of activities that will go from detailed characterization of poLight actuator, driver in a view to use it for AF functionality in imaging camera module system as well as create camera module reference design as well as developing application like AIF, bokeh, depth map extraction applications up to demonstrating and validating the total solution in mobile phone with potential customer. Methodology of testing, design rules, calibration procedure, reference design, SW high level and low level packaged as well as technical report will be the outcome of the projects as well as IP creation and as proven reference implementation of innovative and unmatched performances AF Camera for potential customers.
The project will focus on single camera AF implementation using latest and highest performance sensor and lens with the entire family of poLight products as a first step, but then will migrate as a second step to multicamera solution as well.
The mobile phone market is highly dynamic and the requirements for the auto-focus (AF) lenses become tougher every year. They need larger optical aperture and deliver higher optical power, while maintaining the image quality. There is a trade-off between these requirements, and we need to find original solutions in terms of lens architecture and processing. The targets of this project are to simulate, design and produce an AF TLens Platinum with increased image quality and higher mechanical robustness (starting from the Platinum lens developed in the previous couple of years).
Very small size and low cost are compulsory requirements for components to be integrated in mobile phones. This has to be accomplished without compromising the optical performance and the long-term reliability. The requirement for manufacturability in very high volumes adds to the challenges.
The design concept proposed earlier is implemented into prototypes. After their characterization, the design model will be validated and calibrated. Solutions for improved performance need to be found, by modified design, processing and/or component materials.
Materials and processes that are new and challenging for such applications will be searched for and tested, to ensure improved mechanical robustness already at the wafer level. Challenges are also related to finding suitable characterization methods for such a purpose.
A new packaging has been developed for TLens Platinum. It consist of a plastic frame and a flexible board for electrical connections to the camera module. The concept remains to be tested, validated for manufacturing, and proven reliable. If required, design changed will be implemented.
New-generation prototypes will be fabricated. Extensive functional and reliability testing will be performed.
The mobile phone market is highly dynamic and the requirements for the auto-focus (AF) lenses become tougher every year. They need larger optical aperture and deliver higher optical power, while maintaining the image quality. There is a trade-off between these requirements, and we need to find original solutions in terms of lens architecture and processing. The targets of this project are to simulate, design and produce an AF TLens Platinum with increased image quality and higher mechanical robustness (starting from the Platinum lens developed in the previous couple of years).
Very small size and low cost are compulsory requirements for components to be integrated in mobile phones. This has to be accomplished without compromising the optical performance and the long-term reliability. The requirement for manufacturability in very high volumes adds to the challenges.
The design concept proposed earlier is implemented into prototypes. After their characterization, the design model will be validated and calibrated. Solutions for improved performance need to be found, by modified design, processing and/or component materials.
Materials and processes that are new and challenging for such applications will be searched for and tested, to ensure improved mechanical robustness already at the wafer level. Challenges are also related to finding suitable characterization methods for such a purpose.
A new packaging has been developed for TLens Platinum. It consist of a plastic frame and a flexible board for electrical connections to the camera module. The concept remains to be tested, validated for manufacturing, and proven reliable. If required, design changed will be implemented.
New-generation prototypes will be fabricated. Extensive functional and reliability testing will be performed.
The hybrid MEMS solution is new and innovative, and offers some possibilities that are not available in ordinary MEMS processing. Together with other achievements in ongoing R&D activities, we will have a good platform for introducing new products and a combined solution like AF+OIS in one die.
The big difference to normal MEMS processing is the use of micro-assembly on die-level to build small three-dimensional structures cheaply and efficiently. The driving force for this innovation is a smaller footprint and a lower total cost for the final product. Another important element is an increased degree of freedom in design coming from the possibility of using different process architecture on separate wafer that has been optimized for a specific functionality. It will also potentially improve performance and functionality.
Developing new MEMS products is not easy with the current technology available in the MEMS industry and our work so fare have highlighted the need for poLight to investigate a more affordable solution to generate new products. This include the use of Voice Coil Motor (VCM) or Shape Memory Alloy (SMA) as well as bulk Piezo actuators, which are more mature technology and already proven technology in the mobile industry. The poLight team does not want to close the original path completely, but would like to propose to re-open to a wider range of actuator solution in order to make the better/best choice of technology to realize the set of new functionalities and products.
In 2020 we have continued the work described above. To cover the most relevant market for HybridMEMS we have focused the work on larger apertures (3,5 mm). This has forced us to develop a polymer with a higher refractive index. This is possible, but quit challenging with respect to keeping a low E-modules (softness). A relatively simple demonstrator has been built to show potential customers how it works.
Microfail is devoted to understanding the effect of micro fails and defects on any observed issue like cracks, delamination, corrosion, moisture absorption and haziness. Larger, more complex structures like OIS (Optical Image Stabelizer) are most likely more sensitive to these defects and it is important that we are able to control them. Samples are selected from our product test programs (Not a part of this project) and made in controlled experiments due to time temperature and environment.
All selected samples are analysed by SINTEF and NTNU and evaluated in cooperation with poLight scientists. A number analytical techniques will be used including destructive and non-destructive tests described in the project description. We may also need analytical instruments not available in Norway. Through our partners we may use facilities in SNRF, CERN and som other laboratories. Finally we will tune and adjust wafer processing parameters and assembly process to avoid or reduce the number of defects.
TLens poLight Auto Focus (AF) products can be considered as revolutionary products and has penetrate different
markets today ranging from Webcam, Industrial and AR-VR application, the mobile application are the next big step,
and more opportunities are coming. Therefore, the next generation products must have new features and
performance parameters in different aspect to secure future market opportunities.
The trends of miniature optics are clear. All applications are requesting even higher performances from all aspect
such as optical quality and more demanding reliability requirements. Further sensors size increase and lower FN (i.e.
better light sensitivity) is pushing the need towards bigger aperture tuneable optic (Auto Focus (AF) in particular). It is
also important to consider that some market like the medical application will required smaller footprint tuneable
optic. This request is mainly driven by the endoscope application.
In this project the R&D work is focused on the different elements of the lens that are crucial for the performance,
quality and life time. This typically involve improved properties of the polymer, high force in the actuator, better
mechanical strength and a more optimized design of the final lens stack/camera
The Tlens technology was at an early stage planned to be used in mobile phone main cameras, but over the years the size of this camera and the lens aperture (Light opening) have increased. Because of this we have to carry out R&D work to bring a stronger Tlens technology to the market. A larger aperture may also open å set of new market such as AR/VR and large screens. The actuator have give more force to the system and new actuator solutions have to be developed.. This project will be the first step towards a new actuator technology suitable for thes applications.
Small cameras are used in a range of different applications from invitro medical operations to test and detection equipment. The Tlens technology developed by poLight as has so fare been used in midium size camera in sports watches, QR code readers and some few mobilsphones. Now we aim at new market areas that will require significant changes in size, design and materials. This project focuse on small camera solutions for invitro medical applications and other detection systems that require a very small footprint. At the same time we want to keep the good optical perfomance and high focusing speed known from the Tlens consept.
Organisasjonsnummeret til Polight ASA er 988 862 703.
Hvem er daglig leder i Polight ASA?
Daglig leder i Polight ASA er Øyvind Isaksen (Enhetsregisteret, hentet 16. november 2026).
Hva er omsetningen til Polight ASA?
Driftsinntektene til Polight ASA var 20,5 mill. kr i 2025 (Regnskapsregisteret).
Hvor holder Polight ASA til?
Polight ASA har forretningsadresse Kjelleveien 21A, 3125 Tønsberg, i Tønsberg kommune (Enhetsregisteret, hentet 16. november 2026).
Er Polight ASA konkurs?
Nei, Polight ASA er ikke registrert konkurs (Enhetsregisteret, hentet 16. november 2026).
Hvor mange ansatte har Polight ASA?
Polight ASA hadde 25 ansatte per 13. november 2026 (Enhetsregisteret).
Kort fortalt
2025
Polight ASA er et allmennaksjeselskap med org.nr 988 862 703, registrert i Tønsberg kommune (Vestfold).Bransjen er forskning og eksperimentell utvikling innenfor naturvitenskap og teknikk (næringskode 72.100).Selskapet ble stiftet 20. oktober 2005 og registrert i Enhetsregisteret 9. november 2005.Daglig leder er Øyvind Isaksen, og styreleder er Grethe Helene Viksaas (Enhetsregisteret, hentet 16. november 2026).Selskapet hadde 25 ansatte per 13. november 2026.Polight ASA er morselskap i et konsern med 2 selskaper.Selskapet er registrert i Merverdiavgiftsregisteret og Foretaksregisteret.Forretningsadressen er Kjelleveien 21A, 3125 Tønsberg.
I regnskapsåret 2025 hadde Polight 20,5 mill. kr20 484 000 kr i driftsinntekter (+113 % fra året før). Driftsresultatet ble −130,5 mill. kr−130 481 000 kr og årsresultatet −118,8 mill. kr−118 838 000 kr. Egenkapitalen var 334,4 mill. kr334 418 000 kr av 357,7 mill. kr357 704 000 kr i eiendeler.
Signaler
Mva-registrert
Enhetsregisteret · 16.11.2026
Revisor: KPMG AS.Revisor: KPMG AS.
Rolleregisteret · 16.11.2026
25 ansatte registrert
Enhetsregisteret · 16.11.2026
Signaler er fakta fra registrene, ikke en vurdering fra Firmablikk. Innsigelse
Opplysningene kan være forsinket.Les merVis mindre
Vi får ikke hentet endringer fra Brønnøysundregistrene som normalt akkurat nå. Det du ser, kan mangle de siste endringene. Opplysningene oppdateres igjen når feilen er rettet.