Vi får ikke hentet endringer fra Brønnøysundregistrene som normalt akkurat nå. Det du ser, kan mangle de siste endringene. Opplysningene oppdateres igjen når feilen er rettet.
Sist oppdatert 13.11.2026 fra Brønnøysundregistrene, sist sjekket 10.10.2026, 04:27.
Av hver krone firmaet fikk inn, gikk 9 øre til lønn og 71 øre til andre driftskostnader.
2025
Hvor gikk pengene i 2025?
0 øreInn: 6,6 mill. kr1 krone
Lønn
9 øre
Lønn og sosiale kostnader
592 604 kr592 604 kr
Andre driftskostnader (inkl. varekostnad og avskrivninger)
71 øre
Andre driftskostnader
4,7 mill. kr4 688 393 kr
Skatt
3 øre
Skatt
159 742 kr159 742 kr
Utbytte / annen egenkapitalbevegelse (beregnet)
0 øre
Utbytte til eier
0 kr0 kr
Beholdt i selskapet
17 øre
Beholdt i selskapet
1,1 mill. kr1 125 270 kr
Om tallene
2025 · 01.01.2025–31.12.2025 · NOK
Av hver krone CERAMIC POWDER TECHNOLOGY AS fikk inn, gikk 9 øre til lønn og 71 øre til andre driftskostnader. Utbytte / annen egenkapitalbevegelse (beregnet) utgjorde 0 øre per krone. 17 øre ble beholdt i selskapet.
Utbytte / annen egenkapitalbevegelse er beregnet fra årsresultatet og endringen i egenkapitalen. Det er ikke et bekreftet utbytte.
Øre er avrundet med største rest, slik at en fullstendig fordeling summerer til 100. Beløpene er uendret.
Inntekt = driftsinntekter + positive netto finansinntekter + eventuell skatteinntekt. Fordelingen bygger på regnskapets summer. Manglende utbytte eller annen egenkapitalbevegelse og beholdt beløp vises som ukjent. Beregnet av Firmablikk.
Har 1,13 kr for hver krone som forfaller innen et år
Omløpsmidler som kundefordringer og bank. 0,76 kr av det står i banken.
Bransjen: median 1,71 · n = 24 · 2025
Pengene i banken holder i 419 dager
Beregnet: bankinnskudd delt på driftskostnader per dag. Avskrivninger er ikke oppgitt, så de er med i kostnadene.
Av hver 100 kr selskapet eier er 63 kr egne penger og 37 kr gjeld
Bransjen: median 54 · n = 24 · 2025
Beregnet fra summene i årsregnskapet 2025 · Regnskapsregisteret
Historie på 10 sekunder
Linje: driftsinntekter · stiplet = lest fra PDF · brudd = ikke lagret
Fra 512 554 kr til 6,5 mill. kr i driftsinntekter på 13 år.
12.10.2007Stiftet
28.04.2017Ny daglig leder registrert: Anne Dalager Dyrli
16.12.2019Ny styreleder registrert: Anne Dalager Dyrli
16.11.2026I dag
Nøkkeltall
7
Tallet for valgt år, endring fra året før og ti års utvikling. Stiplet linje er medianen i bransjen (NACE 20.130, 24 selskaper). Ingen ord-karakter – formelen står under.
2025
Nøkkeltall for 2025
Ceramic Powder Technology
Bransjemedian
Valgt år
Driftsmargin
19,2 %
+0,6 pp fra 2024
median −1,8 % (n = 24)
Høyere enn 3 av 4 like store selskaper i bransjen
n = 24 · 2025
Høyere enn 3 av 4 selskaper i bransjen
Bransjen: median 3,7 % · n = 88 · 2025
= driftsresultat ÷ driftsinntekter
Totalrentabilitet
6,2 %
−1,1 pp fra 2024
= (driftsres. + finansinnt.) ÷ sum eiendeler
EK-rentabilitet før skatt
9,8 %
−1,7 pp fra 2024
= resultat før skatt ÷ gj.snitt egenkapital
Egenkapitalandel
63,3 %
−0,7 pp fra 2024
median 51,8 % (n = 22)
Høyere enn halvparten av like store selskaper i bransjen
n = 24 · 2025
Høyere enn halvparten av selskaper i bransjen
Bransjen: median 51,8 % · n = 22 · 2025
= egenkapital ÷ sum eiendeler
Likviditetsgrad 1
1,13
+0,05 fra 2024
median 1,12 (n = 20)
Lavere enn 3 av 4 like store selskaper i bransjen
n = 24 · 2025
Høyere enn halvparten av selskaper i bransjen
Bransjen: median 1,12 · n = 20 · 2025
= omløpsmidler ÷ kortsiktig gjeld
Gjeldsgrad
0,6
+0,02 fra 2024
median 0,6 (n = 22)
Høyere enn halvparten av like store selskaper i bransjen
n = 24 · 2025
Lavere enn halvparten av selskaper i bransjen
Bransjen: median 0,6 · n = 22 · 2025
= sum gjeld ÷ egenkapital
Lønn per krone omsatt
9,1 øre
−2,2 øre fra 2024
= lønnskostnader ÷ driftsinntekter × 100
Om tallene
01.01.2025–31.12.2025 · NOK
Regnet ut av Firmablikk fra årsregnskapet. Kilde: Regnskapsregisteret, hentet 16.11.2026.
Bransjemedian krever minst 20 selskaper.
EBITDA krever avskrivninger, som ikke finnes i Brreg-dataene. Nøkkeltallet vises når avskrivninger er tilgjengelige fra årsregnskapet.
Regnet ut av Firmablikk fra årsregnskap. Kilde: Regnskapsregisteret 16.11.2026.
Kontantstrøm og lønn
Fra 2,0 til 6,1 mill. kr i banken i 2025. Driften ga 4,8 mill. kr, og 0,0 mill. kr gikk til utbytte og kapital (netto), så kassen vokste med 4,1 mill. kr.
2025
Fra start til slutt i banken
Beregnet av Firmablikk fra to sammenlignbare årsregnskap. Drift = årsresultat − endring i fordringer − endring i varelager + endring i kortsiktig gjeld. Uten PDF-utbytte er egenkapitalbevegelsen et anslag, ikke bekreftet utbytte. Restposten avstemmer bankendringen; dette er en forenklet beregning.
Det vi har observert i Enhetsregisteret, Foretaksregisteret og Regnskapsregisteret. Brønnøysundregistrenes egne kunngjøringer finnes hos dem: Se kunngjøringene hos Brønnøysundregistrene
Datoene viser når vi observerte endringen eller hentet årsregnskapet, ikke når Brønnøysundregistrene kunngjorde den. Registreringsdatoen er hentet fra registeret.
Eldre endringer fra før oktober 2026 er ikke registrert hos oss. Stiftelse, navn og regnskapsår vises likevel.
SkatteFUNN og offentlig støtte
19 godkjente SkatteFUNN-søknader, 2010–2027. Beløpene er ikke offentlige.
19
Prosjektperioder for godkjente SkatteFUNN-søknader
2010201320162019202220252027
Utvikling av synteseruter for forbindelsene LWO, SMF og LF4Utvikling av synteseruter for forbindelsene LWO, SMF og LF4: 2010–2010
Lead free actuator componentLead free actuator component: 2012–2013
METPROCELL - innovative fabrication routes and materials for metal and anode supported PCFCMETPROCELL - innovative fabrication routes and materials for metal and anode supported PCFC: 2012–2014
EVOLVE - Evolved materials and innovative design for high-performance, durable and reliable SOFCEVOLVE - Evolved materials and innovative design for high-performance, durable and reliable SOFC: 2013–2016
High performance coatings for PEM electrolyser metallic bipolar platesHigh performance coatings for PEM electrolyser metallic bipolar plates: 2014–2017
CERamic sputtering targets by SPS using advanced powders for TCO COATing depositionCERamic sputtering targets by SPS using advanced powders for TCO COATing deposition: 2016–2019
Demonstration of lead-free piezo componentsDemonstration of lead-free piezo components: 2016–2018
New structured substrates for downstream processing of complex biopharmaceuticalsNew structured substrates for downstream processing of complex biopharmaceuticals: 2017–2020
lead-free piezo electric materials for 3D printinglead-free piezo electric materials for 3D printing: 2019–2022
Demonstration of lead-free piezo componentsDemonstration of lead-free piezo components: 2019–2021
Materialer for null utslipps mobile energi systemMaterialer for null utslipps mobile energi system: 2020–2022
Laser-based sintering of ceramic materials for manufacturing of solid-state battery cells (LASIBAT)Laser-based sintering of ceramic materials for manufacturing of solid-state battery cells (LASIBAT): 2022–2025
Development of lead-free piezo materialsDevelopment of lead-free piezo materials: 2022–2023
Spray Pyrolysis Process DevelopmentSpray Pyrolysis Process Development: 2022–2023
Utvikling av oksider av innskuddsmetaller for katalyseUtvikling av oksider av innskuddsmetaller for katalyse: 2024–2027
Utvikling av nye oksider for protonledende keramiske celler (PCC celler)Utvikling av nye oksider for protonledende keramiske celler (PCC celler): 2024–2026
Nye materialer for SOEC for ren hydrogen produksjon for OITB in CLEANHYPRONye materialer for SOEC for ren hydrogen produksjon for OITB in CLEANHYPRO: 2025–2025
The 3DPIEZO project will develop a manufacturing chain for lead (Pb)free piezoelectric devices for ultrasonics
and other applications. 3D printing and multilayer lamination will be the principal manufacturing methods,
applying high performance leadfree piezoelectric ceramics. All critical steps of the manufacturing chain will be
developed and demonstrated at TRL 6. Optimised versions of at least two different materials systems will be
applied: bismuth sodium titanate (BNT) and potassium sodium niobate (KNN). The consortium consists of two
SMEs and one research organisation: Ceramic Powder Technology AS is a Norwegian producer of advanced
ceramics powder by spray pyrolysis, CERHUM S.A. in Wallonia is a specialist in 3D printing of ceramics, and
SINTEF is the largest research organisation in Norway. To guide the project and provide component designs,
3DPIEZO will have an Industrial Advisory Board (IAB) with representatives from companies that use
piezoelectric components in their products or services.
The project aim to develop more environmental friendly piezo electric materials. Today the most common piezo electric material is lead zirconate titanate (PZT), representing an annual lead consumption of about 600 tons. In 2003, the European Union adopted the Restriction of Hazardous Substances Directive 2002/95/EC, (RoHS 1), restraining the use of six hazardous materials in the manufacture of various types of electronic and electrical equipment, hence limiting the maximum lead concentration in products at 0.1% by weight. Due to the societal importance of piezoelectric devices, the industry has so far been granted a time-limited exemption from this ban. Because the PZTs market is expected to reach nearly $40 billion in 2017, large market shares are to be conquered for lead-free piezo-electric devices. In particular, the current world market for piezoelectric actuators, the most promising application to replace PZT by lead-free materials, takes around 33 % of the market share by itself. Lead free piezo materials are not commercially available today and Cerpotech aim to develop and commercialize lead free piezo electric materials for several applications and markets.
The project aim to develop materials for batteries and hydrogen technology systems for the transportation sector. The work is intended to access and strengthen our share of the international battery market. The energy density is of major importance in electric vehicles, and lithium ion batteries (LIBs) are therefore generally preferred for this application. Chemistries based on Ni and Co related materials have issues with costs and toxicity, which must be overcome if they are to be used in high voltage LIBs. In order to achieve significant improvements in the energy density of conventional LIBs, there will be activities to improve the anode, cathode, and electrolyte. Battery and hydrogen technologies have been demonstrated for use in zero emission transport systems in many countries and regions around the world. However, further developments are needed before these technologies can be introduced into other transport sectors, such as heavy-duty transport by road, rail, or sea. The project will focus on battery and hydrogen value chains, systems, and applications where Norway can take leading position in the future. The work will focus on research that can lead to breakthrough development in materials and key components for batteries and hydrogen related technologies (fuel cells, electrolyzers, and gas separation membranes).
The performance of conventional lithium-ion batteries is hindered by some technical and safety limitations. An alternative is the solid-state battery, where a solid electrolyte layer replaces the organic solvent and the separator. However, solid-state batteries are challenging to manufacture. Long sintering steps at high temperatures can cause reduced electrochemical performance. In LASIBAT, a scalable inline laser sintering process is developed for the manufacturing of solid-state batteries. Functional ceramic materials are adapted to the new and comparably fast laser sintering method. The new processing method is highly relevant for use in production of solid-state lithium-ion batteries for automobile applications or portable devices. The project will provide knowledge about the manufacturing of solid-state battery materials which creates great market potential for European battery manufacturers as well as companies producing and developing laser system technology.
The project aim to develop more environmental friendly piezo electric materials. Today the most common piezo electric material is lead zirconate titanate (PZT), representing an annual lead consumption of about 600 tons. In 2003, the European Union adopted the Restriction of Hazardous Substances Directive 2002/95/EC, (RoHS 1), restraining the use of six hazardous materials in the manufacture of various types of electronic and electrical equipment, hence limiting the maximum lead concentration in products at 0.1% by weight. Due to the societal importance of piezoelectric devices, the industry has so far been granted a time-limited exemption from this ban. Because the PZTs market is expected to reach nearly $40 billion in 2017, large market shares are to be conquered for lead-free piezo-electric devices. In particular, the current world market for piezoelectric actuators, the most promising application to replace PZT by lead-free materials, takes around 33 % of the market share by itself. Lead free piezo materials are not commercially available today and Cerpotech aim to develop and commercialize lead free piezo electric materials for several applications and markets.
Ceramic powder technology are manufacturing advanced ceramic oxide by use of spry pyrolysis process. Our manufacturing facility is located at Tiller outside Trondheim. The spray pyrolysis process is a modular process in which some of the steps such as the pyrolysis are continuous process. This is a great starting point for scale up and maintain the quality. We have a broad range of products within various application areas such as fuel cells, lead free piezo, battery materials and more.
We are preparing for large volume manufacturing and will through this project develop cost effective sustainable ton scale manufacturing based on the results from this project. During the project we will develop the various steps to be more robust and prepare for further upscaling over time.
Input from suppliers, customer, project partners and consultants will be sources to achieve the improved large scale manufacturing lines. All the steps from the pyrolysis to the post treatment to achieve the desired powder properties. Teh development of such process will give the company a competitive advantage and opportunity to gain a considerable market share within several market areas.
Growth in the Global Lead-free Piezoelectric Material market is driven by factors such as technological advancements, rising demand, and regulatory support. There have been major advances in the development of BT, BNT, and KNN based Pb-free piezoelectric materials for sensor, actuator, and HF ultrasonic transducer applications and Cerpotech aim with this project to claim a market share in the future. We will focus on develop new materials for emerging markets and solve the R&D challenges with sustainable powder properties and manufacturing. Various parameters from raw material sourcing to post processing will be investigated and we will cooperate with parents to perform characterisation of functional properties. The two patent applications filed for BNT-based compositions and composites and will be followed up during this project.
Transition metal oxides has significant attention due to their broad range of properties and applications. According to a review article from March 2024, the TMO´s are promising, but the development of increased functional properties is challenging. Both composition and synthesis method have effect on the functionality. Cerpotech´s manufacturing technology, spray pyrolysis, give very fine high-quality powders and that seem to be suitable to manufacture particles with high surface area important in catalysis.
The main goal of this project is to develop 1-3 compositions with enhanced properties for use in catalysis, especially electro catalysis. We will investigate literature and get input from partners and customers within R&D to identify candidates. Very often new materials are prepared in lab scale at various actors, but we aim to be there for large volume manufacturing of new materials. The project will end up with new compositions that will give Cerpotech new products.
Going into the hydrogen industry there has been increased interest in proton conducting ceramics (PCC) that can function at lower the operating temperature (< 600). Electrolysers based on PCCs are a promising technology, capable of combining high efficiency, flexibility under diverse working conditions and excellent performance. Special attention is paid to novel functional materials, technological strategies and modes of optimising PCCs to allow their excellent electrochemical characteristics to be maintained at relatively low operation temperatures. The development of proton-conducting materials for energy-related applications faces challenges in achieving high proton conductivity at various temperature ranges, balancing material properties, and ensuring stability in different environments. The main goal of this project is to develop protocols for new materials c that have potentially good properties for use in proton conducting cell ( PCC).
CERPOTECH are partners in CLEANHYPRO, 101091777-HORIZON-CL4-2022-RESILIENCE-01-20, (2023-2026) which have focus on four technologies for electrolyzers. , AEL Alkaline Electrolysis PEMEL Proton Exchange Membrane Electrolysis, AEMEL Anion Exchange Membrane Electrolysis and SOEC Solid Oxide Electrolysis Cell. The specifications and definations are set by 2024.
The objective is to develop sustainable and cost-effective manufacturing of electrode materials for SOEC to be processed in pilot line 7 and 8 at IREC for an OITB on SOEC together with Elcogen, 3DCERMA, IREC and VTT.
Main tasks for CERPOTECH will be developing new formulations of electrode, barriers and functional layer powders for SOEC technology. Then the integration of the new developed materials and processes into large area stackable SOEC cells and stacks. CERPOTECH expect to develop protocols for 2-4 materials to fulfil the KPI´s and develop the manufacturing from TRL4 to 6
Periode
2025
Ordning
SkatteFUNN
Beløp
Ikke oppgitt · Beløp: ikke offentlig
Kilde: SkatteFUNN (Forskningsrådet og Skatteetaten) · hentet
Hva er organisasjonsnummeret til Ceramic Powder Technology AS?
Organisasjonsnummeret til Ceramic Powder Technology AS er 991 900 829.
Hvem er daglig leder i Ceramic Powder Technology AS?
Daglig leder i Ceramic Powder Technology AS er Anne Dalager Dyrli (Enhetsregisteret, hentet 10. oktober 2026).
Hva er omsetningen til Ceramic Powder Technology AS?
Driftsinntektene til Ceramic Powder Technology AS var 6,5 mill. kr i 2025 (Regnskapsregisteret).
Hvor holder Ceramic Powder Technology AS til?
Ceramic Powder Technology AS har forretningsadresse Kvenildmyra 6, 7093 Tiller, i Trondheim kommune (Enhetsregisteret, hentet 10. oktober 2026).
Er Ceramic Powder Technology AS konkurs?
Nei, Ceramic Powder Technology AS er ikke registrert konkurs (Enhetsregisteret, hentet 10. oktober 2026).
Hvor mange ansatte har Ceramic Powder Technology AS?
Ceramic Powder Technology AS hadde 5 ansatte per 10. oktober 2026 (Enhetsregisteret).
Kort fortalt
2025
Ceramic Powder Technology AS er et aksjeselskap med org.nr 991 900 829, registrert i Trondheim kommune (Trøndelag - Trööndelage).Bransjen er produksjon av andre uorganiske kjemiske råvarer (næringskode 20.130).Selskapet ble stiftet 12. oktober 2007 og registrert i Enhetsregisteret 14. november 2007.Daglig leder er Anne Dalager Dyrli, og styreleder er Anne Dalager Dyrli (Enhetsregisteret, hentet 10. oktober 2026).Selskapet hadde 5 ansatte per 10. oktober 2026.Selskapet er registrert i Merverdiavgiftsregisteret.Forretningsadressen er Kvenildmyra 6, 7093 Tiller.
I regnskapsåret 2025 hadde Ceramic Powder Technology 6,5 mill. kr6 533 495 kr i driftsinntekter (−10 % fra året før). Driftsresultatet ble 1,3 mill. kr1 252 498 kr og årsresultatet 1,1 mill. kr1 125 270 kr. Egenkapitalen var 13,7 mill. kr13 713 656 kr av 21,6 mill. kr21 648 380 kr i eiendeler.
Signaler
Mva-registrert
Enhetsregisteret · 10.10.2026
Revisor: MAGNAR GRENDAL.Revisor: MAGNAR GRENDAL.
Rolleregisteret · 10.10.2026
5 ansatte registrert
Enhetsregisteret · 10.10.2026
Signaler er fakta fra registrene, ikke en vurdering fra Firmablikk. Innsigelse
Flere selskaper i Trondheim innen produksjon av kjemikalier og kjemiske produkter